21cnlab.com - 21世纪实验室

您的位置首页 > 化学词典 > 化学品安全技术说明书 2,3-Dibromopropionic Acid, 99%

2,3-Dibromopropionic Acid, 99%


    2008-07-10 18:25:25   MSDS    

    ****Section 1 - Chemical Product And Company Identification ****

    MSDS Name:   2,3-Dibromopropionic Acid, 99%
    Synonym:   Alpha,Beta-Dibromopropionic Acid; 2,3-Dibromopropanoic Acid.
    Company:   AboutChem.com

    **** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

    +----------------+--------------------------------------+----------+-----------+
    | CAS# | Chemical Name | % | EINECS# |
    |----------------|--------------------------------------|----------|-----------|
    | 600-05-5 |2,3-Dibromopropionic Acid | 99% | 209-981-1 |
    +----------------+--------------------------------------+----------+-----------+
    Hazard Symbols: C
    Risk Phrases: 34

    **** SECTION 3 - HAZARDS IDENTIFICATION ****

    EMERGENCY OVERVIEW
    Causes burns.Corrosive.

    Potential Health Effects
    Eye:
    Causes eye burns. May cause chemical conjunctivitis and corneal
    damage.
    Skin:
    Causes skin burns. May cause skin rash (in milder cases), and cold
    and clammy skin with cyanosis or pale color.
    Ingestion:
    Causes gastrointestinal tract burns. May cause perforation of the
    digestive tract. May cause cardiac disturbances. May cause central
    nervous system effects. May cause systemic effects.
    Inhalation:
    Causes chemical burns to the respiratory tract. Aspiration may lead
    to pulmonary edema. Central nervous system effects may include
    confusion, ataxia (failure of muscular coordination), vertigo,
    tinnitus, weakness, disorientation, lethargy, drowsiness, and
    finally coma. May cause cardiac abnormalities. May cause systemic
    effects.
    Chronic:
    Effects may be delayed.

    **** SECTION 4 - FIRST AID MEASURES ****

    Eyes:
    Get medical aid immediately. Do NOT allow victim to rub eyes or keep
    eyes closed. Extensive irrigation with water is required (at least 30
    minutes).
    Skin:
    Get medical aid immediately. Immediately flush skin with plenty of
    water for at least 15 minutes while removing contaminated clothing
    and shoes. Wash clothing before reuse. Destroy contaminated shoes.
    Ingestion:
    Never give anything by mouth to an unconscious person. Get medical
    aid immediately. Do NOT induce vomiting. If conscious and alert,
    rinse mouth and drink 2-4 cupfuls of milk or water.
    Inhalation:
    Get medical aid immediately. Remove from exposure and move to fresh
    air immediately. If breathing is difficult, give oxygen. Do NOT use
    mouth-to-mouth resuscitation. If breathing has ceased apply
    artificial respiration using oxygen and a suitable mechanical device
    such as a bag and a mask.
    Notes to Physician:

    **** SECTION 5 - FIRE FIGHTING MEASURES ****

    General Information:
    As in any fire, wear a self-contained breathing apparatus in
    pressure-demand, MSHA/NIOSH (approved or equivalent), and full
    protective gear. During a fire, irritating and highly toxic gases
    may be generated by thermal decomposition or combustion. Contact
    with metals may evolve flammable hydrogen gas. Containers may explode
    when heated. Non-combustible, substance itself does not burn but may
    decompose upon heating to produce irritating, corrosive and/or toxic
    fumes.
    Extinguishing Media:
    Use water spray to cool fire-exposed containers. Do NOT get water
    inside containers. For small fires, use dry chemical, carbon
    dioxide, or water spray. For large fires, use dry chemical, carbon
    dioxide, alcohol-resistant foam, or water spray.

    **** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

    General Information: Use proper personal protective equipment as indicated
    in Section 8.
    Spills/Leaks:
    Vacuum or sweep up material and place into a suitable disposal
    container. Clean up spills immediately, observing precautions in the
    Protective Equipment section. Avoid generating dusty conditions.
    Provide ventilation.

    **** SECTION 7 - HANDLING and STORAGE ****

    Handling:
    Use only in a well-ventilated area. Minimize dust generation and
    accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in
    eyes, on skin, or on clothing. Keep container tightly closed. Do not
    ingest or inhale. Discard contaminated shoes.
    Storage:
    Keep container closed when not in use. Corrosives area.

    **** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

    Engineering Controls:
    Facilities storing or utilizing this material should be equipped
    with an eyewash facility and a safety shower. Use adequate
    ventilation to keep airborne concentrations low.
    Exposure Limits
    CAS# 600-05-5:


    Personal Protective Equipment

    Eyes:
    Wear appropriate protective eyeglasses or chemical
    safety goggles as described by OSHA's eye and face
    protection regulations in 29 CFR 1910.133 or European
    Standard EN166.
    Skin:
    Wear appropriate protective gloves to prevent skin
    exposure.
    Clothing:
    Wear appropriate protective clothing to prevent skin
    exposure.
    Respirators:
    Follow the OSHA respirator regulations found in 29
    CFR 1910.134 or European Standard EN 149. Use a
    NIOSH/MSHA or European Standard EN 149 approved
    respirator if exposure limits are exceeded or if
    irritation or other symptoms are experienced.

    **** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

    Physical State: Crystals
    Color: very slightly yellow
    Odor: None reported.
    pH: Not available.
    Vapor Pressure: Not available.
    Viscosity: Not available.
    Boiling Point: 160 deg C @ 20.00mmHg
    Freezing/Melting Point: 64.00 - 66.00 deg C
    Autoignition Temperature: Not applicable.
    Flash Point: Not applicable.
    Explosion Limits, lower: Not available.
    Explosion Limits, upper: Not available.
    Decomposition Temperature:
    Solubility in water:
    Specific Gravity/Density:
    Molecular Formula: C3H4Br2O2
    Molecular Weight: 231.87

    **** SECTION 10 - STABILITY AND REACTIVITY ****

    Chemical Stability:
    Stable under normal temperatures and pressures.
    Conditions to Avoid:
    Incompatible materials, dust generation, excess heat, strong
    oxidants.
    Incompatibilities with Other Materials:
    Oxidizing agents, strong bases.
    Hazardous Decomposition Products:
    Carbon monoxide, irritating and toxic fumes and gases, carbon
    dioxide, hydrogen bromide.
    Hazardous Polymerization: Has not been reported.

    **** SECTION 11 - TOXICOLOGICAL INFORMATION ****

    RTECS#:
    CAS# 600-05-5: UF0660000
    LD50/LC50:
    Not available.
    Carcinogenicity:
    2,3-Dibromopropionic Acid -
    Not listed by ACGIH, IARC, or NTP.
    Other:
    See actual entry in RTECS for complete information.

    **** SECTION 12 - ECOLOGICAL INFORMATION ****



    **** SECTION 13 - DISPOSAL CONSIDERATIONS ****

    Dispose of in a manner consistent with federal, state, and local regulations.

    **** SECTION 14 - TRANSPORT INFORMATION ****

    IATA
    Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
    Hazard Class: 8
    UN Number: 3261
    Packing Group: II
    IMO
    Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
    Hazard Class: 8
    UN Number: 3261
    Packing Group: II
    RID/ADR
    Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
    Hazard Class: 8
    UN Number: 3261
    Packing group: II

    **** SECTION 15 - REGULATORY INFORMATION ****

    European/International Regulations
    European Labeling in Accordance with EC Directives
    Hazard Symbols: C
    Risk Phrases:
    R 34 Causes burns.
    Safety Phrases:
    S 26 In case of contact with eyes, rinse immediately
    with plenty of water and seek medical advice.
    WGK (Water Danger/Protection)
    CAS# 600-05-5: No information available.
    Canada
    CAS# 600-05-5 is listed on Canada's NDSL List.
    CAS# 600-05-5 is not listed on Canada's Ingredient Disclosure List.
    US FEDERAL
    TSCA
    CAS# 600-05-5 is listed on the TSCA inventory.

    **** SECTION 16 - ADDITIONAL INFORMATION ****

    MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

    The information above is believed to be accurate and represents the best
    information currently available to us. However, we make no warranty of
    merchantability or any other warranty, express or implied, with respect to
    such information, and we assume no liability resulting from its use. Users
    should make their own investigations to determine the suitability of the
    information for their particular purposes. In no way shall the company be
    liable for any claims, losses, or damages of any third party or for lost
    profits or any special, indirect, incidental, consequential or exemplary
    damages, howsoever arising, even if the company has been advised of
    the possibility of such damages.
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------





精彩推荐
关于我们 - 联系我们 - 广告服务 - 友情链接 - 网站地图 - 版权声明 - 人才招聘 - 帮助